Polycarbonate 3x4.3m Outdoor Garden Structure

Structure - The Polycarbonate Garden Structures are made from a light tubular aluminium frame. There are eight corner support bars and a central top cap which has been manufactured from steel which adds extra strength and durability. The four legs includes a base plate which allows the legs to attach to the ground in your outdoor space this allows the gazebo to be safely secured to an area. The Polycarbonate Roof Panels are made from a Multiwall Polycarbonate so there are two layers of polycarbonate. The Roof Panels are 6mm thick and included three tinted layers therefore providing UV Protection.

Curtains and Nets - We have specially designed the structure to have both curtains and nets on all sides of the Polycarb garden structure therefore stopping flies (Eg: mosquito's) getting into the structure. The curtains and nets are individual so can be open or closed by themselves or all together. 

Assembly - due to the size of this item it is delivered flat packed and will require assembly. We recommend a minimum of two people to build this item as well as a step ladder. All the Instructions and fittings kit is included.

Measurements 

External – 3×4.3m
Internal – 2.1x4m
Height to the top of the apex roof – 2.55m
Height to the underneath of the roof bar frame 1.9m

What is Included: Polycarbonate garden structure, Grey curtains and nets, instructions and fittings.

Securing to the ground - Our polycarb gazebos do not include fittings to the floor, this is because different floorings require different fixings. We would recommend coach bolts if you were to fix to concrete. We would recommend  substantial wood screws and washers if you were to fix into decking. We do not recommend placing our polycarbonate gazebos on grass, if you do we would recommend 45cm square and deep sections filled with post crete to place the feet on top - ensure these are level and use coach bolts to fasten to the concrete. 

Cleaning this item - To clean our 2.5m Polycarb outdoor garden structure we advise that first you should remove all debris from the roof. if you choose to use a broom to do this we advise a soft touch broom as otherwise it may scratch the polycarbonate and could cause leaks. To clean the frame we would advise to use a soft sponge and Luke-warm water, for best results wipe in the same direction of the polycarbonate.